Offset Mount Dual Motion Mixer

Offset Mount Mixer is used in applications where more than one mixing action is required, and for processors who require the flexibility to address a wider variety of products. The most common configuration is a center mounted scraper with an offset turbine style mixer less the steady bearing. Other configurations include a center sweep style mixer and substituting a high shear style mixer for the offset turbine.

This style of mixer is constructed where one mixer is concentrically mounted and one is off-set, allowing for an optional third mixer. A sanitary steady bearing is used to support the center shaft, eliminating the bending moment caused by offset mounting. A rigid cross arm stiffens the scraper frame to handle the most severe service. The most common configuration is a scraper/turbine combination. For additional product movement in high viscosity applications, multiple flow impellers are combined to ensure complete product movement with no dead zones.

 Double Duty:

  • Fluid mixing up 75,000cps (consult factory for higher viscosities)
  • Use for two component mixing of highly viscous liquids
  • Gentle blending / folding action to maintain particulate integrity
  • High viscosity blending with near complete blade coverage
  • Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
  • Able to add a third top mixer or hanging baffle

 Typical Products:

  • Cosmetics
  • Juice Concentrates
  • Soups

Super Duty:

  • Fluid mixing up 150,000cps (consult factory for higher viscosities)
  • Gentle blending / folding action to maintain particulate integrity
  • High viscosity blending with near complete blade coverage
  • Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
  • Able to add a third top mixer or hanging baffle

Typical Products:

  • Cosmetics
  • Tomato Paste
  • Mayonnaise