The Torqo 1600 Accessories

The Torqo 1600 is easy to use, easy to set up, easy to move and low maintenance! Tooling is available for any threaded closure – including child resistant caps – and this compact unit delivers and stores precise results at the touch of a button.

It now comes pre-equipped with Universal Torqo Chuck, As an increased variety of closure designs have gained prominence and popularity in the industry, Mesa Labs has developed a new Universal Chuck to accommodate multiple serration patterns and cap sizes with a single change part.

The torqo can be fitted with the all new Model 1506 Beverage Bottle Clamp is a quick-acting bottle holding device that can be easily adjusted to accommodate from 10 oz. to 3 liter bottle sizes.

The Model 1624 Quick Clamp Vise is an easy to use bottle holding fixture that combines the flexibility of a lead screw pin vise with the rapid loading and unloading of an over-center type clamp. This vise is capable of holding round bottles from 5/8-inch diameter to 6 inch diameter and square bottles from 5/8-inch to 6 inch. Short and long pins are available.

The 1626 Slide Chuck can be used to torque test roll-on-pilfer proof (ROPP) caps which are commonly used to package product in the alcoholic beverage and wine industries. The unique jaw sets allow the chuck to grip the rolled on serration patterns of the cap in order to perform both destructive and non-destructive torque testing.

The Yoke Chuck extends our testing capabilities beyond the average continuous thread and Child-Resistant closures. This chuck can accommodate unusually tall and odd-shaped closures such as finger tip sprayers/pumps and trigger sprayers/pumps which are commonly used in the pharmaceutical, chemical and cosmetic industries. The unique interchangeable jaw sets allow the chuck to grip virtually any serration patterns for cap diameters up to ~100mm.

With a 1507 Calibration Kit, the accuracy of your Torqo can be verified or a complete on-site calibration can be performed by the user. Contained in this kit is a precision Calibration Disk, a ball bearing load support assembly and the necessary hardware to use this kit. The weights required for performing a calibration are not included in the kit but may be purchased from Mesa Laboratories, Inc.

And one of the most demanded Torqo Accessories is the Child Resistant Closure Option.

The Model 1605 Child Resistant Closure Option enables the Torqo to be used for measuring the removal torque on the child-resistant type cap that requires a downforce in order to be opened. An air supply with the ability to provide a minimum of 60 PSI is required for this option. Both an air filter and an adjustable air regulator are contained in this kit and permanently mounted to the drive cover. The installation of this option on a Torqo does not affect in any way its use on conventional bottles and caps.

To find out more about the Torqo 1600 or the available accessories, please give us a call at 800-829-5741.

About Marko

Speak Your Mind

*

1 visitors online now
1 guests, 0 members
Max visitors today: 4 at 12:35 am
This month: 4 at 04-01-2020 12:35 am
This year: 55 at 01-28-2020 09:21 am
All time: 253 at 10-02-2019 01:57 am