PK series Inline Container Closure Integrity Test Machines

A complete range of products that covers all nominal production throughput/ speed of production lines.

Each Machine is designed for Non-Invasive, Non-Destructive Integrity Testing of diverse type of Pharmaceutical Containers and Contents. It is conceived for 100% in-line testing at high production speed. Testing is fast, reliable and repeatable, giving consistent results and allowing for full batch control without altering the container or content features.

Vacuum Decay or Pressure Decay Methods allow to reach full compliance with current GMP international regulations.

High class mechanical design and automation solutions fit for the purpose to perform, ease service and avoid downtime.

Equipment has full capability to be integrated in Industry 4.0 environment with Electronic Batch Record management or Manufacturing Execution Systems.

MULTIPLE FORMAT, CONTENT TYPE AND SIZES MACHINE

With the same machine, various tests are available; in terms of contents: liquid, lyo and powder and in terms of containers: wide range of sizes. High quality handling system, comprising State of the art electronic actuators and motor inverters, as well as high class mechanical design allow high machine adaptability to line output variations. Optimal testing results are achieved at nominal speed and also in case of speed reductions and increases.

HIGH FLEXIBILITY INSTALLATION

High machine installation flexibility, by means of rotating tables or other systems like tray loading, it is possible to install the machine in-line, off-line or next to the production line.

REPORTS & DATA MANAGEMENT

Production, test and alarms reports are printable either local or network printer. Testing and production data are downloadable on USB driver and printable either local or network printer.

STATISTICAL PROCESS CONTROL

Statistical Process Control is conceived to give full support to the quality system, maintenance and process control staff. It allows to improve control ability and to have a constant evaluation of the manufacturing processes, keeping track and analyzing the collected data on different time frames. This brings to reduced deviations and basically helps to improve the yield. Features of Statistical Process Control are: – Trend analysis – Alarm Statistics – Histogram Graphs – Run Charts (X and R) Giving statistical representation of measurement acquisitions, it is possible to calculate significant process parameters (Avg, std.dev., Cp,Cpk). From another perspective, it also saves the historical data for comparison, gives quick access to most frequent failures both of the GMP critical, business and safety ones. Pareto diagrams representations allow to highlight the most relevant failure modes, calculating Statistical parameters (i.e.: MTBF – Mean Time Between Failure and MTTR – Mean Time To Repair).

REGULATORY COMPLIANCE

Equipment test method complies with:

FDA Guidance for Industry “Container and Closure System Integrity Testing in Lieu of Sterility Testing

 as a Component of the Stability Protocol for Sterile Products”.

United States Pharmacopoeia General Chapter «1207» “Packaging Integrity Evaluation”.

EU Guidelines to GMP Medicinal Products for Human and Veterinary Use – Annex 1 “Manufacture of Sterile Medicinal Products”.

PDA Technical Report No. 27 “Pharmaceutical Package Integrity”

FDA 21 CFR Part 11 and EU Annex 11

DATA INTEGRITY

The system generates the following logfiles: Production report, Tests report, Events report, Alarms report. Complete and accurate historical data copies are available through the use of a viewer utility on Report graphical pages (accessible as read-only) and can be downloaded. Electronic data which are stored into the System cannot be deleted or changed by any user. Electronic signature is available for verification and authorization of most critical process steps.

HMI Operator interfacing is featured by a SCADA System made up of interactive graphical pages allowing to: – Manage Electronic Records, Operators accounts and System accesses – Report and record Operator critical actions, process activities, anomaly conditions (Audit Trail) – Control Testing Process and access to online Troubleshooting – Set Machine critical parameters (Recipes, Operators, Configuration) HMI Real Time display of Leak Testing Cycle diagram.

GAMP 5 COMPLIANCE Equipment computerized system is designed according to ISPE GAMP 5 guidelines.

TEST METHOD

Machine Leak Testing Measurement System follows the approved industry standard “ASTM F2338-09”: “Standard Test Method for Non-Destructive Detection of Leaks in Packages”. The Test method is a Recognised Consensus Standard by the United States Food and Drug Administration (FDA), Center for Devices and Radiological Health (CDRH), effective March 31, 2006 (Reference: Federal Register Notice FR Notice (list #014) [Docket No. 2004N-0226].

AUTOTEST

Autotest function has the aim to verify the measurement system capability to detect leaking Containers simulating a Calibrated Leak. This function is useful and applicable during qualification stages as well as during usual production cycle, to automatically confirm proper functioning and behavior of each testing chamber.

RELATIVE TRANSDUCER FUNCTION

Relative Transducer Functionality Algorithm Checking every Relative Transducer both for incorrect Atmospheric Pressure Reading and for overpressure. The monitoring operation is executed in continuous during run-time.

AUTOMATIC DRYING SYSTEM

This system automatically dries each Testing Chamber which might have been contaminated by liquid or moisture left by leaking Containers. To avoid the possibility of producing false rejects, it is necessary that every potentially contaminated Testing Chamber is brought back to its optimal state of operation before this is allowed to test other Containers. With A.D.S. enabled, Containers are not fed into the Testing Chamber to be dried but passed on to the next available one. As a result, this particular Chamber will perform an empty cycle during which a continuous vacuum dries it. Whilst under vacuum, any residue will be evaporated, therefore drying the Testing Chamber.

BAROMETRIC COMPENSATION ALGORITHM

This system has the function to avoid variations in Pressure readings coming from the Relative Transducer by means of compensating any changes due to atmospheric pressure fluctuations.

TEMPLATE URS

Support to customer’s URS development for specific application to reach, considering a common definition (customer and supplier), the best possible solution.

AUTODIAGNOSTICS

Autodiagnostics automatically verifies the optimal working condition of: Pressure and Exhaust Electrovalves, Relative Pressure Transducers, Testing Chamber (in terms of airtightness). Autodiagnostics is automatically enabled at Machine Start-Up and can also be manually activated while Machine is in production phase, pressing a dedicated button on the HMI. Container feeding to the Central Carousel is mechanically blocked during the Autodiagnostics execution.

VALIDATION PACKAGE

Machine Qualification and Validation complies with requirements stated in EU Annex 15. Validation Package guarantees complete and efficient regulatory compliance. Standard Validation Package includes: Project Quality Plan, Functional Design Specifications, Mechanical/  Hardware / Software Specifications, FAT /SAT, IQ and OQ. Moreover, following documents are available for delivery: Performance Specifications, Performance Qualification, Design Qualification, 21 CFR Part 11 Compliance Table, Traceability Matrix to supplied URS.

About Marko

Speak Your Mind

*

2 visitors online now
2 guests, 0 members
Max visitors today: 9 at 10:29 am
This month: 35 at 03-08-2019 06:48 pm
This year: 35 at 03-08-2019 06:48 pm
All time: 112 at 02-06-2018 03:16 pm