Air conveyor from Vetromecannica

 

 

The ruggedly constructed Eolo air conveyors are built from thick gauge stainless steel in order to stand up under the most demanding industrial conditions. Air conveyor segments are freestanding and load tested for maximum structural stability. Wherever system routing conditions require special mounting, for example, along ceilings, high above walls, etc., the air conveyor segments utilize appropriate structural supports that guarantee sufficient structural integrity of the plant.
The Eolo air conveyors are single chamber plenums of square cross-section, supporting a bottle channel lower face. The plenum cross sectional area is great enough such that air velocity within the chamber is close to zero. Thus, the static air pressure exhibits almost no loss along the air conveyor length. Local air pressure spikes near fan ports are eliminated by the use of short horizontal baffles at the blower mouths. For cleaning purposes the plenum segments feature bolt-on inspection covers every meter ca. The covers are airtight sealed with rubber gaskets.
Empty PET bottles hang from their neck rings on two parallel rails in the omega conveyor section. Air from the plenum is directed onto the bottles’ finish with a forward-facing vector from jet openings placed at regular intervals along the omega’s internal walls. This air jet is sufficient for accelerating all bottle sizes at speeds from 0m/s to 4m/s ca. in level conveyor sections, as well as for pushing bottles up maximum 10° inclines. Air conveyor lengths are divided into independent segments of not more than 10 meters; vertical end plates seal one segment’s air plenum from the abutting segment’s plenum.

Speak Your Mind

*

2 visitors online now
2 guests, 0 members
Max visitors today: 4 at 12:43 am
This month: 24 at 12-11-2018 11:12 pm
This year: 112 at 02-06-2018 03:16 pm
All time: 112 at 02-06-2018 03:16 pm